BSENIS0 16396-2:2022 BSl Standards Publication Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties bsi. BS EN IS0 16396-2:2022 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN IS0 16396-2:2022 It is identical to IS0 16396-2:2022. It supersedes BS EN IS0 16396-2:2017, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/82, Thermoplastic materials. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2022 Published by BSI Standards Limited 2022 ISBN 978 0 539 12556 6 ICS83.080.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2022. Amendments/corrigenda issued since publication Date Textaffected BS EN ISO 16396-2:2022 EN IS0 16396-2 EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM July 2022 ICS 83.080.20 Supersedes EN IS0 16396-2:2017 English Version Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (IS0 16396-2:2022) Plastiques - Materiaux a base de polyamide (PA) pour Kunststoffe - Polyamid (PA)-Formmassen fur das moulage et extrusion - Partie 2: Preparation des SpritzgiefBen und die Extrusion - Teil 2: Herstellung éprouvettes et détermination des propriétes (Iso von Probekorpern und Bestimmung von Eigenschaften 16396-2:2022) (IS0 16396-2:2022) This European Standard was approved by CEN on 24 June 2022. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cer EUROPEAN COMMITTEEFOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELECManagementCentre:RuedelaScience23,B-1040Brussels 2022CEN Ref. No. EN ISO 16396-2:2022 E All rightsofexploitationinanyformandbyanymeans reserved worldwide for CEN national Members.