BSIS0 1206:2023+A1:2024 BSl Standards Publication Rolling bearings Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values bsi. BSIS0 1206:2023+A1:2024 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 1206:2023+A1:2024. It supersdes BS IS0 1206:2023, which is withdrawn. The start and finish of text introduced or altered by amendment is the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by A A. The UK participation in its preparation was entrusted to Technical Committee MCE/7, Rolling bearings A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN 978 0539271676 ICS 21.100.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2023. Amendments/corrigenda issued since publication Date Textaffected 30 September 2024Implementation of IS0 amendment 1:2024 BS IS0 1206:2023+A1:2024 INTERNATIONAL IS0 1206 STANDARD +A1 Fifth edition 2023-01 Amendment 1 2024-09 Rolling bearings Needle roller bearings with machined rings Boundary dimensions, geometrical product specifications (GPS) and tolerance values Roulements - Roulements a aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géometrique des produits (GPS) et valeurs de tolérance Reference number IS0 1206:2023(E) ISO @ IS0 2023