BS ISO 13209-1:2011 BSI Standards Publication Road vehicles Open Test sequence eXchange format (OTX) Part 1: General information and use cases NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSi raising standards worldwider BSISO13209-1:2011 BRITISHSTANDARD National foreword This British Standard is the UK implementation of ISO 13209-1:2011. The UK participation in its preparation was entrusted to Technical Committee AUE/16, Electrical and electronic equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @BSI2011 ISBN9780580675430 ICS 43.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Amendments issued since publication Date Text affected BS ISO 13209-1:2011 INTERNATIONAL ISO STANDARD 13209-1 First edition 2011-11-01 Road vehicles Open Test sequence eXchange format (OTX) - Part 1: General information and use cases Vehicules routiers -Format public d'échange de séquence-tests (OTX) Partie 1: Information generale et cas d'utilisation Reference number ISO 13209-1:2011(E) OSI @ISO2011 BS ISO13209-1:2011 ISO 13209-1:2011(E) COPYRIGHTPROTECTEDDOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, member body in the country of the requester. ISO copyright office Casepostale56·CH-1211Geneva20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ ISO 2011 - All rights reserved BSISO13209-1:2011 ISO 13209-1:2011(E) Contents Page Foreword .iv Introduction. 1 Scope. 2 Normative references. 3 Terms,definitions and abbreviated terms 3.1 Terms and definitions. 3.2 Abbreviated terms. 4 3 Document overview and structure 5 General considerations.. 3 5.1 Integration of OTX with existing standards. 3 5.2 Improvement of documentation quality... 5.3 Refinementofdiagnostic authoringprocesses 5.4 Achievinglong-termavailabilityoftestseguences 5 5.5 Setting up a uniform process chain.. 6 5.6 OTX authoringand impact on ModularVCI software architecture 5.7 OTX-based runtime system architecture. 5.8 OTX benefit examples.. .10 .12 6 Use case overview and principles 6.1 Basic principles for use case definition. .12 6.2 Use case clustering .12 6.3 .12 7 Usecases 7.1 Cluster 1:Documentation and specification 13 7.2 Cluster 2: Exchange and reusability. .14 7.3 Cluster 3: Extensibility. .15 7.4 Cluster 4: Localization 15 7.5 Cluster 5: Runtime execution .17 Bibliography. ..19 @ ISO 2011 - All rights reserved ii BSISO13209-1:2011 ISO 13209-1:2011(E) Foreword IsO (the International Organization for Standardization) is a worldwidefederation ofnational standards bodies (iSO member bodies). The work of preparing International Standards is normally carried out through ISO non-governmental,inliaisonwithISO,alsotakepartinthework.IsOcollaboratescloselywiththeInternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75%of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ISO 13209-1was prepared by Technical Committee ISO/TC22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment. IsO 13209 consists of the following parts, under the general title Road vehicles - Open Test sequence eXchangeformat (OTX): Part 1: General information and use cases Part 2: Core data model specification and requir