PD IS0/TS 8100-23:2024 — Tracked Changes compares PD IS0/TS 8100-23:2024 with DD IS0/TS 22559-4:2011 BSl Standards Publication Lifts for the transport of persons and goods - Part 23: Requirements for bodies certifying lifts, model lifts, lift components and lift functions bsi. TRACKED CHANGES IMPORTANTPLEASENOTE This is a tracked changes copy and uses the following colour coding: Text example 1 indicates added text (in green) Text example 2 indicates removed text (in red) indicates added graphic figure or table indicates removed graphic figure or table About Tracked Changes This document is a PDF containing a Tracked Changes version of PD IS0/TS 8100-23, which compares PD IS0/TS 8100-23:2024 with DD IS0/TS 22559-4:2011. The original version of PD IS0/TS 8100-23:2024, appended at the end of this document, should be considered the version of record for this publication. PLEASE NOTE This Track Changes document is designed to allow the user to identify the main changes to the standard since the previous version. It is not the official standard.Users arethereforeadvised torefertothe official version of record for implementation purposes. To ensure you have the latest version of record, please visit https://knowledge.bsigroup.com @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN 978 0539324389 Amendments/corrigenda issued since publication Date Text affected PD IS0/TS 8100-23:2024 — Tracked Changes National foreword This Draft for DevelopmentPublished Document is the UK implementation ofIS0/TS 8100-23:2024. It supersedes S0/ TS 22559-4:2011DD IS0/TS 22559-4:2011, which is withdrawn This publication is not to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature. It should be applied on this provisional basis, so that information and experience of its practical application can be obtained. Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the- international organization responsible for its conversion to an international standard. A review of this publication will be initiated not later than 3 years after its publication by the international organization so that a decision can be taken on its status. Notification of the start of the review period will be made in an announcement in the appropriate issue of Update Standards. According to the replies received by the cnd of the review period, the responsible BSI Committee will decide whether to support the conversion into an international Standard, to extend the life of the Technical Specification or to withdraw it. Comments should be sent to the Secretary of the responsible BSI Technical Committee at British Standards House, 389 Chiswick High Road, London W4 4AL. The UK participation in its preparation was entrusted to Technical Committee MHE/4, Lifts, hoists and escalators. A list of organizations represented on this committee can be obtained on request to its seeretarycommittee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by Bs in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extentpermittedbythelaw. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication This publication doesis not purportintended to inelude all the neeessary provisions ofconstitute a contract. Users are responsible for its correct application. This publication is not to be regarded as a British Standard. @ The British Standards Institution 20112024 Published by BSI Stan