ENIS0 19085-11 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM October 2024 ICS 13.110; 79.120.10 Supersedes EN IS0 19085-11:2020 English Version Woodworking machines - Safety - Part 11: Combined machines (IS0 19085-11:2024) Machines a bois - Sécurité - Partie 11: Machines Holzbearbeitungsmaschinen - Sicherheit - Teil 11: combinees (IS0 19085-11:2024) Kombinierte Maschinen (IS0 19085-11:2024) This European Standard was approved by CEN on 7 July 2024. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by Centre has the same status as the official versions. CENmembers arethenational standardsbodiesofAustria,Belgium,Bulgaria,Croatia,Cyprus, Czech Republic, Denmark,Estonia Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tirkiye and United Kingdom. ces EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels @2024CEN All rights of exploitation in any form and by any means reserved Ref. No. EN IS0 19085-11:2024 E worldwide for CEN national Members. EN IS0 19085-11:2024 (E) Contents Page European foreword... Annex ZA (informative) Relationship between this European Standard and the essential EN IS0 19085-11:2024 (E) European foreword This document (EN IS0 19085-11:2024) has been prepared by Technical Committee IS0/TC 39 "Machine tools" in collaboration with Technical Committee CEN/TC 142 “Woodworking machines Safety" the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of ar identical text or by endorsement, at the latest by April 2025, and conflicting national standards shall be withdrawn at the latest by April 2025. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN IS0 19085-11:2020. This document is intended to be used in conjunction with Part 1 of the series. This document has been prepared under a standardization request addressed to CEN by the European Commission. The Standing Committee of the EFTA States subsequently approves these requests for its Member States. For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this document. Any feedback and questions on this document should be directed to the users' national standards body/national committee. A complete listing of these bodies can be found on the CEN website. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiye and the United Kingdom. Endorsement notice The text of IS0 19085-11:2024 has been approved by CEN as EN IS0 19085-11:2024 without any modification. 3