BS EN IS0 18497-3:2024 Tracked Changes compares BS EN IS0 18497-3:2024 with BS EN IS0 18497:2018 BSl Standards Publication Agricultural machinery and tractors Safety of partially automated, semi-autonomous and autonomous machinery Part 3: Autonomous operating zones bsi. TRACKED CHANGES IMPORTANT PLEASENOTE This is a tracked changes copy and uses the following colour coding: Text example 1 indicates added text (in green) Text example 2 indicates removed text (in red) indicates added graphic figure or table indicates removed graphic figure or table About Tracked Changes This document is a PDF containing a Tracked Changes version of BS EN ISO 18497-3, which compares BS EN ISO 18497-3:2024 with BS EN ISO 18497:2018. The original version of BS EN IS0 18497-3:2024, appended at the end of this document, should be considered the version of record for this publication PLEASENOTE This Track Changes document is designed to allow the user to identify the main changes to the standard since the previous version. It is not the official standard.Users aretherefore advised to refer tothe official version of record for implementation purposes. To ensure you have the latest version of record, please visit https://knowledge.bsigroup.com this @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN 978 0 539 33218 6 Amendments/corrigenda issued since publication Date Text affected 60 uo S BS EN IS0 18497-3:2024 — Tracked Changes National foreword This British Standard is the UK implementation of EN ISO 18497-3:2024. It is identical to ISO 18497-3:2024. It supersedes EN IS0 18497:2018BS EN ISO 18497:2018, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee AGE/6, Agricultural tractors and forestry machinery A list of organizations represented on this committee can be obtained on request to its seeretarycommittee manager Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness orreasonableness ofthispublication.Allandany such responsibility and liability is expressly disclaimed to the full extentpermittedbythelaw. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication This publication doesis not purportintended to inelude all the necessary provisions ofconstitute a contract. Users are responsible for its correct application. This publication has been prepared under a mandate given to the European Standards Organizations by the European Commission and the European Free Trade Association. It is intended to support requirements of the EU legislation detailed in the European Foreword. A European Annex, usually Annex ZA or ZZ, describes how this publication relates to that EU legislation. For the Great Britain market (England, Scotland and Wales), if UK Government has designated this publication for conformity with UKCA marking (or similar) legislation, it may contain an additiona) National Annex. Where such a National Annex exists, it shows the correlation between this publication and the relevant UK legislation. If there is no National Annex of this kind, the relevant Annex ZA or ZZ in the body of the European text will indicate the relationship to UK regulation applicable in Great Britain. References to EU legislation may need to be read in accordance with the UK designation and the applicable UK law. Further information on designated standards can be found at www. For the Northern Ireland market, UK law will continue to implement relevant EU law subject to periodic confirmation. Therefore Annex ZA/zZ in the European text, and references to EU legislation, are still valid for this market.