EN IS0 11782-2:2008/A1 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM May 2024 ICS 77.060 English Version Corrosion of metals and alloys - Corrosion fatigue testing Part 2: Crack propagation testing using precracked specimens - Amendment 1 (IS0 11782-2:1998/Amd 1:2024) Corrosion des metaux et alliages - Essais de fatigue- Korrosion von Metallen und Legierungen - Prifung der corrosion - Partie 2: Essais d'amorce de rupture sur Schwingungskorrosion-Teil 2: Rissausbreitungsprufung an angerissenen Proben deséprouvettespréfissurées-Amendement1(Iso 11782-2:1998/Amd1:2024) Anderung 1 (IS0 11782-2:1998/Amd 1:2024) This amendment A1 modifies the European Standard EN IS0 11782-2:2008; it was approved by CEN on 11 December 2023. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. Finland, France, Germany,Greece,Hungary,Iceland, Ireland, Italy,Latvia, Lithuania, Luxembourg,Malta, Netherlands,Norway Poland,Portugal,Republic ofNorth Macedonia, Romania, Serbia, Slovakia,Slovenia,Spain,Sweden, Switzerland,Tirkiyeand United Kingdom. cen EUROPEANCOMMITTEEFORSTANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels @2024CEN All rights of exploitation in any form and by any means reserved Ref.No.ENIS011782-2:2008/A1:2024E worldwidefor CEN national Members. EN IS0 11782-2:2008/A1:2024 (E) Contents Page European foreword... 2 ENIS0 11782-2:2008/A1:2024 (E) European foreword This document (EN IS0 11782-2:2008/A1:2024) has been prepared by Technical Committee IS0/TC 156 "Corrosion of metals and alloys" in collaboration with Technical Committee CEN/TC 262 "Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys" the secretariat of which is held by BSI. This Amendment to the European Standard EN IS0 11782-2:2008 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2024, and conflicting national standards shall be withdrawn at the latest by November 2024. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights Any feedback and questions on this document should be directed to the users' national standards body/national committee. A complete listing of these bodies can be found on the CEN website. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal,Republicof North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiye and the United Kingdom. Endorsement notice The text of IS0 11782-2:1998/Amd 1:2024 has been approved by CEN as ENIS0 11782 2:2008/A1:2024 without any modification. 3