论文标题
双向综合传感和通信:全双工还是半封面?
Bidirectional Integrated Sensing and Communication: Full-Duplex or Half-Duplex?
论文作者
论文摘要
提出了双向综合传感和通信(ISAC)系统,其中一对收发器进行双向通信和相互感应。窄带和宽带系统中的全双工和半双链操作都是为双向ISAC构想的。 1)对于窄带系统,对常规的全双工和半双链操作进行了重新设计,以考虑传感回声信号。然后,提出了两种收发器的发射光束形成设计,以解决感应和通信(S&C)折衷。提出了一种依靠连续凸近似(SCA)的一层迭代算法,以获得Karush-Kuhn-Tucker(KKT)最佳解决方案。 2)对于宽带系统,为双向ISAC提出了新的全双工和半双链操作。特别是,通过延迟预补偿和基于路径的光束形成来解决频率选择性褪色通道。通过重新设计基于SCA的算法,可以获得用于表征S&C权衡的基于路径的光束形成的KKT最佳解决方案。最后,数值结果表明:i)对于两种带宽方案,通过感应完整双链的结果引入的干扰的存在可能并不总是超过半双链,尤其是在Sensing-Prior示范中,或者当通信通道是视线范围内的范围为主导的; ii)对于两种双工操作,足以重用在窄带系统中传感的通信信号,而宽带系统中需要额外的专用传感信号。
A bidirectional integrated sensing and communication (ISAC) system is proposed, in which a pair of transceivers carry out two-way communication and mutual sensing. Both full-duplex and half-duplex operations in narrowband and wideband systems are conceived for the bidirectional ISAC. 1) For the narrowband system, the conventional full-duplex and half-duplex operations are redesigned to take into account sensing echo signals. Then, the transmit beamforming design of both transceivers is proposed for addressing the sensing and communication (S&C) tradeoff. A one-layer iterative algorithm relying on successive convex approximation (SCA) is proposed to obtain Karush-Kuhn-Tucker (KKT) optimal solutions. 2) For the wideband system, the new full-duplex and half-duplex operations are proposed for the bidirectional ISAC. In particular, the frequency-selective fading channel is tackled by delay pre-compensation and path-based beamforming. By redesigning the proposed SCA-based algorithm, the KKT optimal solutions for path-based beamforming for characterizing the S&C tradeoff are obtained. Finally, the numerical results show that: i) For both bandwidth scenarios, the existence of the interference introduced by sensing results in full-duplex may not always outperform half-duplex, especially in the sensing-prior regime or when the communication channel is line-of-sight-dominated; and ii) For both duplex operations, it is sufficient to reuse communication signals for sensing in the narrowband system, while an additional dedicated sensing signal is required in the wideband system.