论文标题
连贯的近壁结构和通过跨度强迫减少阻力
Coherent near-wall structures and drag reduction by spanwise forcing
论文作者
论文摘要
通过用于通过直接数字模拟获得的条件平均技术研究,通过有条件的平均技术进行了有条件的平均技术研究,研究了湍流通道的近壁区域的准并层涡流(QSV)的流向前进壁速度(STTW)的影响。 A. Yakeno,Y。Hasegawa,N。Kasagi的分析,“在阻力减小的湍流通道流动中,横向旋转壁振荡的速率涡流结构的修饰”,物理。流体26,085109(2014)考虑了特殊的墙壁振荡(OW)的特殊情况,它扩展到了STTW的一般情况,该案例既减少又增加了湍流的皮肤摩擦阻力。发现STTW显着影响涡旋种群的壁正常分布。涡流周围有条件平均的速度场表明,QSV对象限雷诺的贡献在控制周期中剪切应力发生了显着变化。一方面,至于OW,抑制Q2事件(低速流体从墙壁上移动)主导了拖放过程。另一方面,Q2和Q4事件的增强(高速流体向墙壁下降)与阻力增加有关。基于雷诺应力的相变量与STTW诱导的构量张量的主要方向之间的链接,提出了使用物理上重要的参数来克服现有模型的缺点。
The effect of streamwise-traveling waves of spanwise wall velocity (StTW) on the quasi-streamwise vortices (QSV) populating the near-wall region of turbulent channels is studied via a conditional averaging technique applied to flow snapshots obtained via Direct Numerical Simulation. The analysis by A. Yakeno, Y. Hasegawa, N. Kasagi, "Modification of quasi-streamwise vortical structure in a drag-reduced turbulent channel flow with spanwise wall oscillation", Phys. Fluids 26, 085109 (2014), where the special case of spatially uniform wall oscillation (OW) was considered, is extended to the general case of StTW, which yield both reduction and increase of turbulent skin-friction drag. StTW are found to significantly impact the wall-normal distribution of the vortex population. The conditionally averaged velocity field around the vortices shows that the contributions of the QSV to the quadrant Reynolds shear stresses change significantly during the control cycle. On the one hand, as for OW, the suppression of Q2 events (with upwelling of low-speed fluid away from the wall) dominates the drag-reduction process. On the other, the enhancement of Q2 and also Q4 events (with downwelling of high-speed fluid toward the wall) is related to drag increase. Based on the link identified between the phase changes of the Reynolds stresses and the principal directions of the rate-of-strain tensor induced by the StTW, a predictive correlation for drag reduction by StTW is proposed which uses physically significant parameters to overcome the shortcomings of existing models.