论文标题
伴随墙的普遍动量定律补充
Adjoint Complement to the Universal Momentum Law of the Wall
论文作者
论文摘要
该纸是针对流体动态动量边界层的壁(低)通用定律的伴随补充。后者通常是从恒定的应力假设下强烈简化的单向剪切流进行的。我们首先得出了简化动量方程的伴侣,同时区分了两种策略。使用混合长度参数,我们证明了冷冻的湍流策略和低一致的(差异化)方法几乎提供了相同的伴随动量方程,这仅在单个标量系数中差异,从而控制对数区域中的倾斜度。而且,可以看出,可以得出伴随的低点,在许多方面都类似于其原始的对应物。该策略还与突出的Rans-type双方程湍流模型的壁功能假设兼容,该模型基于混合长度假设。由于经常采用的假设的直接结果是,所有原始流量特性都以摩擦速度进行缩放,因此证明一个简单的代数表达式提供了对数层中伴随动量方程的一致闭合。该代数伴随的闭合也可以用作使用原始流量的标准的一或两方程的Boussinesq-粘度模型进行更通用的伴随流优化研究的近似值。从建议的代数封闭中获得的结果将针对低和高RE设置的原始/伴随低配方进行验证。本文中包含的应用是指内部和外部工程流的二维形状优化。相关的结果表明,与冷冻湍流方法相比,提出的伴随代数湍流闭合可以加速优化过程,并提供了改进的优化过程。
The paper is devoted to an adjoint complement to the universal Law of the Wall (LoW) for fluid dynamic momentum boundary layers. The latter typically follows from a strongly simplified, unidirectional shear flow under a constant stress assumption. We first derive the adjoint companion of the simplified momentum equation, while distinguishing between two strategies. Using mixing-length arguments, we demonstrate that the frozen turbulence strategy and a LoW-consistent (differentiated) approach provide virtually the same adjoint momentum equations, that differ only in a single scalar coefficient controlling the inclination in the logarithmic region. Moreover, it is seen that an adjoint LoW can be derived which resembles its primal counterpart in many aspects. The strategy is also compatible with wall-function assumptions for prominent RANS-type two-equation turbulence models, which ground on the mixing-length hypothesis. As a direct consequence of the frequently employed assumption that all primal flow properties algebraically scale with the friction velocity, it is demonstrated that a simple algebraic expression provides a consistent closure of the adjoint momentum equation in the logarithmic layer. This algebraic adjoint closure might also serve as an approximation for more general adjoint flow optimization studies using standard one- or two-equation Boussinesq-viscosity models for the primal flow. Results obtained from the suggested algebraic closure are verified against the primal/adjoint LoW formulations for both, low- and high-Re settings. Applications included in this paper refer to two- and three-dimensional shape optimizations of internal and external engineering flows. Related results indicate that the proposed adjoint algebraic turbulence closure accelerates the optimization process and provides improved optima in comparison to the frozen turbulence approach.